|
Vinyl Removal Instructions
|
|
|
|
Tools Needed
|
|
|
|
|
|
Step 1
Carefully heat up a
section of the vinyl to be removed.
Be careful no to
overheat the area; it may cause damage to the
underlying surface. |
|
|
|
|
Step 2
With a plastic
chiseler start a corner and lift vinyl from the
surface.
Repeat
steps 1 & 2 until all vinyl is removed. |
|
|
|
|
Step 3
If you are lucky there will be little adhesive
residue left on the surface, in most cases there
will be adhesive left on the surface.
Start the cleaning
process by soaking the area in an adhesive remover.
Wipe off all of the adhesive with a paper towel or
cloth.
Tip: scrape of big chunks of adhesive with side of
your plastic chisel. |
|
|
|
|
Step 4
Spray and wipe surface
down with a cleaning solution to remove any left
over adhesive remover/adhesive. let area dry.
Now
it's time for the fun part;
Applying New Vinyl! |
|
|
|
Vinyl Removal
Fluid |
|
We offer a great vinyl
adhesive remover that is designed to take the
adhesive and vinyl off the surface without a lot of
elbow grease. It is biodegradable, non-toxic and non
-flammable.
Instructions:
Apply to area and let set for 5-15mins. Lift one
corner and peel off, clean surface and it's ready
for a new vinyl application.
|
|
Vinyl Removal Fluid
Visit Toolbox |
